DATASHEET
LA-ON-RACK-V.10
REV 01 · 2026-07 · EN
ONLINE RACK UPS · SERIE LA-ON-RACK-V.10Continuous power
for critical systems
Double conversion, rack format and expansion with external battery banks.
Online double conversion
TECHNOLOGY
2 models
LA-ON-6K · 10K RACK-V.10
Rack 19"
FORMAT
IDEAL FOR
Data centers
Technical rooms
Telecom
Critical loads
QUICK DECISIONThe essentials, at a glance
Key figures for the range
POWER
6 / 10 kVA
POWER FACTOR
1
OUTPUTS
Terminal Block
COMMUNICATION
USB + RS-232
Optional SNMP · AS400 · ModBus
TECHNICAL ADVANTAGESKey features
● True double-conversion online UPS
● Output power factor 1
● Ready for connection of external battery banks
● Wide input voltage range (110-300 VAC)
● DSP technology that guarantees high performance
● High efficiency of up to 94 %
● Active input power factor correction 0.99
● 50Hz/60Hz frequency converter mode
2-year electronics warranty
1-year battery warranty
Free pickup & return service
Only applicable in the Iberian Peninsula
www.laparaups.com
contacto@laparaups.com
REV 01 · 2026-07 · EN
LA-ON-RACK-V.10
01 / 02
Technical specifications
SERIE LA-ON-RACK-V.10 | ONLINE RACK UPS
MODEL
LA-ON-6K-RACK-V.10
LA-ON-10K-RACK-V.10
| LA-ON-RACK-V.10 SERIES UPS |
| CAPACITY* | 6000VA / 6000W | 10000VA / 10000W |
| INPUT |
| Voltage range (Line loss) | 110 - 300 VAC @ (0~60%) Load / 140 - 300 VAC @ (60~80%) Load / 176 - 300 VAC @ (80~100%) Load |
| Voltage range (Line recovery - low) | Low line loss voltage + 10V |
| Voltage range (Line recovery - high) | High line loss voltage - 10V |
| Frequency range | Programmable 46Hz ~ 54 Hz @ 50 Hz / 56Hz ~ 64 Hz @ 60 Hz |
| Phase | Single phase with earth connection (phase + neutral) |
| Power factor | ≥ 0.99 at nominal voltage and 100% load |
| THDi | < 4% at 100% load, <6 % at 50% load |
| OUTPUT |
| Output voltage (Low voltage transfer) | Programmable 208/220/230/240VAC (default: 230 VAC) |
| AC voltage regulation (Battery mode) | ± 1% |
| Frequency range (Synchronized range) | Programmable 46Hz ~ 54 Hz @ 50Hz / 56Hz ~ 64 Hz @ 60Hz |
| Frequency range (Battery mode) | Programmable 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz |
| Crest current ratio | 3:1 |
| Harmonic distortion | ≤ 1 % @ 100% linear loads; ≤ 4 % @ 100% non-linear loads |
| Transfer time (Mains ↔ Battery) | 0 ms |
| Transfer time (Inverter ↔ Bypass) | 0 ms |
| Transfer time (Inverter ↔ ECO) | < 10 ms |
| Waveform (Battery mode) | Pure sine wave |
| EFFICIENCY |
| AC mode | > 94% |
| ECO mode | > 94% |
| BATTERY |
| Battery type | 12V / 7AH | 12V / 9AH |
| Quantity | 20 | 20 |
| Typical recharge time | 7 hours to recharge 90% capacity | 9 hours to recharge 90% capacity |
| Charging current | 1 A ± 10% (max.) |
| Charging volts | (Number of batteries*13.65 V) ± 1% |
| INDICATORS |
| LCD display | UPS status, load level, battery level, input/output voltage, discharge time and fault conditions. |
| ALARMS |
| Battery mode | Sounding every 4 seconds |
| Low battery | Sounding every second |
| Overload | Sounding twice every second |
| Fault | Continuous sound |
| PHYSICAL DATA |
| UPS dimensions, D x W x H (mm) | 600 X 438 X 88 (2U) |
| Battery bank dimensions, D x W x H (mm) | 600 X 438 X 138 (3U) |
| Net weight (kg) (UPS) | 13,50 Kg | 16 Kg |
| Net weight (kg) (Battery bank) | 55 kg | 63 kg |
| ENVIRONMENTAL CONDITIONS |
| Humidity | <95 % non-condensing |
| Operating temperature | 0 ~ 40°C (battery life is reduced at temp. > 25°C) |
| **Operating altitude | <1000m |
| Noise level | < 55dB @ 1 meter |
| MANAGEMENT SOFTWARE |
| Smart RS-232 & USB | Supports Windows 2000/2003/XP/Vista/2008/7/8/10, Linux, Unix and Mac |
| Optional SNMP | Power management from the SNMP manager and web browser. |
* Specifications subject to change without notice. Please refer to the applicable service conditions.
www.laparaups.com
contacto@laparaups.com
LA-ON-RACK-V.10
