BYPASS PDU – REDUNDANT SYSTEMS AND ATS
Various accessories for power distribution, maintenance, backup systems, monitoring and redundancy valid for uninterruptible power supplies (UPS).
Ficha Técnica
LA ATS
The Automatic Transfer Switch is designed with two independent electrical inputs to supply power from a primary power source.
Independent power sources, redundant protection- Selectable source from front panel RS232
- USB communication port
- Rack format 19″ 1U
Provides continuous power switching to devices
And in the event of a power failure at the main input, the switch automatically transfers the current from the secondary input, thus maintaining uninterrupted power to the devices.
LA-PDU-MT-R-IEC
Rackmount PDU allows multiple devices to be connected to the power supply, monitors outputs in real time and provides output control with scheduled power off and on.
- Total active energy measurements
- Multiple RS-232 / USB and SNMP communications (Optional)
- Real-time current measurements (amps)
8 IEC C13 (10A) connectors are available and can be configured with sequential power-on output delay to prevent current spikes.
LA-PDU-SM-R-IEC
The combination of the PDU function and a master-slave control design allows the maintenance bypass function and a compact energy-saving mechanism to be available at the same time.
- Reduces wasteful energy consumption
- Large number of sockets
- 19″ rack format
- Suitable for UPSs up to 3KVA compatible
Allows for manual transfer of electrical current by means of a bypass switch, making it possible to maintain the UPSs
LA-PDU-SM-T-SCHK
A device that allows several devices to be connected to the power supply acting as a PDU in addition to having a power transfer switch.
- Tower/box format
- Large number of sockets
- Valid for UPSs up to 3KVA compatible
- Easy installation
Easy operation due to simple rotary switch for power transfer when used in bypass mode
LA-PDU-SM-R-SCHK
Allows the manual transfer of electrical current by means of a bypass switch, making it possible to maintain the UPSs or replace it without interrupting the supply to the equipment.
- 19″ rack format
- Compact energy saving system.
- Valid for 3KVA UPS
The combination of PDU function and a master-slave control design allows for a maintenance bypass function and an energy-saving control PDU.
LA-RBS
Designed to provide a 1+1 redundant security system at reduced cost, with the integration of two UPS’s providing extra security that a single UPS cannot provide.
- Rack format 19″ and valid for UPSs up to 3KVA
- Maximum input current 16A for 208/220/230/240VAC voltages
- Double power supply for a redundant system
Simple solution that guarantees the continuity of the current to the connected equipment
LA-SM-BYPASS-R-6/10K
It allows the manual transfer of electrical current by means of a bypass switch, making it possible to maintain the UPSs or replace it without interrupting the supply to the equipment.
- 19″ rack format
- 63A switch
- Recommended for UPSs 6/10KVAs
Indispensable for maintenance, repair and battery replacement without the equipment connected to the UPS being left without power while the UPS is out of service.
Bypass maintenance
Redundant systems
Power distribution
Tell us what you need. We can help you!
Fill out our form and we will contact you shortly.
LAPARA
AV. Sistema Solar 31 Nave A4 – 28830 –
San Fernando de Henares – Madrid
Email:
contacto@laparaups.com
Telephone: +34 916 556 079